Technical effects and advantages of dry circuit board recycling equipment
Release Time：2022-12-25 Source：Lithium battery recycling equipment Share：
Waste circuit boards are mainly composed of organic reinforced resin, glass fiber, copper foil and electronic components, which contain a large number of valuable metals (such as copper, iron, aluminum, tin, etc.), dry circuit board recycling equipment to effectively achieve the harmless recycling of waste circuit boards, to achieve its re-resource, for reducing environmental pressure and prevent environmental pollution, to improve the re-use of secondary resources. What are the technical effects and advantages of dry circuit board recycling equipment.
1. circuit board recycling equipment to solve the existing circuit board recycling there is a low recovery efficiency of the technical problems, to achieve a reasonable design of equipment, automatic completion of the recovery of circuit boards, high recovery efficiency, and recycling effect is better technical effect.
2. Equipment advantages, low noise, no water, no dust pollution, power saving, labor saving, absolutely no waste, metal and non-metal 99% fully recycled.
3. Dry circuit board recycling equipment takes a dry crushing, crushing, so that the waste circuit board into a mixture of metal and resin fiber end, and then through the high-voltage electrostatic separator to separate the metal and resin and other non-metal process route. In order to prevent dust pollution during processing, the equipment uses a three-in-one dust removal device, dust removal device has three levels of dust removal: cyclone dust removal, bag dust removal and air purifier dust removal, effectively solving the problem of dust pollution, the indicators are up to standard.
The circuit board recycling equipment can recycle used circuit boards into reusable glass-plastic mixed particles, remove the components on the circuit board from the substrate; sort and store the disassembled components; crush the disassembled circuit boards; separate the circuit board powder, and separate the metal and non-metal in the powder. The magnetic separation unit is used to suck out the metal powder from the circuit board powder. The precipitation and filtration unit is used to precipitate and filter the circuit board powder to extract the metal filtrate. The rotation unit is used to rotate the circuit board powder to separate the metal powder, and then the metal powder is electrostatically sorted to sort and recover the metal powder.