Lithium battery crushing and recycling equipment-Circuit board separation and recycling equipment-Xingmao machineryLithium battery crushing and recycling equipment-Circuit board separation and recycling equipment-Xingmao machinery

Cell phone lithium battery crushing and recycling equipment
Cell phone lithium battery crushing and recycling equipment
Lithium battery recycling equipment

Cell phone lithium battery crushing and recycling equipment

设备产能:0.2~1吨/小时设备功率:≤129.25KW

电源:三相交流电380V/50Hz,200KVA可处理废电池尺寸(mm):600 X 600

Home > Products > Lithium battery recycling equipment
Product Details

Xingmao waste cell phone lithium battery recycling equipment mainly adopts physical recycling methods, supplemented by "three waste" disposal measures, with green low-carbon, energy-saving and environmental protection, no secondary pollution and other characteristics, and take into account the economic and environmental benefits, not only to achieve the use of valuable components, but also to harmless treatment of harmful components. The whole recycling process is industrial automation, with high recycling efficiency and processing capacity of 500 kg per hour and an annual processing capacity of 5,000 tons, and the recycling rate of valuable components of used lithium batteries is over 90%.
The cobalt, lithium, copper and plastic in waste lithium batteries are valuable resources with high recovery value. Therefore, the scientific and effective treatment and disposal of waste lithium batteries not only has significant environmental benefits, but also has good economic benefits. Lithium battery is mainly composed of shell, positive electrode, negative electrode, electrolyte and diaphragm.

Cell phone lithium battery crushing and recycling equipmentProduct Details
Solutions
The cobalt, lithium, copper and plastic in used cell phone lithium batteries are valuable resources with high recovery value. Therefore, the scientific and effective treatment and disposal of waste lithium batteries not only has significant environmental benefits, but also has good economic benefits. Lithium battery is mainly composed of shell, positive electrode, negative electrode, electrolyte and diaphragm. The positive electrode is composed of lithium cobaltate powder coated on both sides of the aluminum foil collector through PVDF, which plays a bonding role; the negative electrode structure is similar to the positive electrode, composed of carbon powder bonded on both sides of the copper foil collector. At present, the research on the resourceization of waste lithium batteries mainly focuses on the recovery of high-value cobalt and lithium precious metals from the positive electrode, and the separation and recovery of negative electrode materials is rarely reported. In order to alleviate the increasingly serious problem of resource shortage and environmental pollution caused by rapid economic development, it has become a global consensus to achieve full-component recycling of waste materials. The copper (about 35%) in the negative electrode of waste lithium batteries is an important production material widely used, and the carbon powder adhered to it can be used as additives in plastics and rubber. Therefore, the effective separation of the constituent materials of waste lithium battery cathode is a driving force to achieve the maximum resource utilization of waste lithium battery and eliminate its corresponding environmental impact. The working principle is to crush the raw material to below 10mm with crusher, then enter the particle crusher for stripping and crushing, and then enter the micro powder classifier for separation and treatment, and the tail ash is collected by the back cyclone separator and pulse dust collector.
Cell phone lithium battery crushing and recycling equipmentProcess Flow
Process Flow

The waste battery is sent into the A shredder by conveyor for shredding, and the shredded material is sent into the secondary multi-knife crusher through conveyor for secondary crushing, and the secondary crushed material enters into the conveyor while setting magnetic separation equipment, which can sort out the iron in the material, and the sorted material is sent into the airflow sorter through conveyor, and the diaphragm paper in the positive and negative pole is separated out through the induced fan and cyclone downcomer, and the After sorting, the positive and negative pieces are fed into the three-stage crusher for fine crushing, and the materials are crushed to about 20 mesh.   The crushed material will enter into the cyclone separator by negative pressure system for dust filtration and stratify the different density material by two airflow sorting, then get the positive and negative electrode material with copper, aluminum, nickel, etc., while all the ultra-fine dust will be brought into the pulse dust collector by negative pressure system for collection. And the filtered tail gas will continue to be sent by the negative pressure system to the tail gas treatment equipment for air purification to make it reach the national emission standard before high altitude emission.

Technical parameters

1、Equipment capacity: 0.2~1 ton/hour

2、Outline size:26311 X 6121 X 6350mm

3、Equipment power:≤129.25KW

4、Power supply: three-phase AC 380V/50Hz,200KVA.

5、Can handle waste battery size (mm): 600 X 600

 6, iron recovery rate (weight %): ≥ 99%

7, copper and aluminum recovery rate (weight %): ≥ 98%

 8, positive and negative very material recovery rate (weight %): ≥ 99%

 9, noise, dust leakage and exhaust emissions in line with relevant national standards and requirements.

10, site requirements: plant height greater than 7 meters; plant door width greater than 4 meters, height greater than 5 meters; load capacity greater than 10 tons.

11、Appearance and color of the equipment: according to the enterprise standard.
 

Online Message
Hot Products
Hot News

Home

Products

Inquiry

Tel