Lithium Battery Recycling Machine

Waste lithium batteries are first sent through the conveyor to the first-class shredder for effective shredding, shredded materials need to be sent through the conveyor to the second multi-knife crusher for a second crushing, through the second crushing of materials if sent to the conveyor again. There is professional magnetic separation equipment inside the equipment, this step is to separate the iron contained in the material. After the separation of the material and then the conveyor to the airflow sorting machine, after the need to pass through the induced draft fan and cyclone under the feeder. This process is to effectively separate the diaphragm paper from the positive and negative pieces of used batteries, and then transport the sorted positive and negative pieces to the three-stage shredder for fine crushing again, the material needs to be crushed to about twenty mesh. After crushing the material and then by the negative pressure system tree hole to the cyclone separator in the filter, from the process is to carry out the powder. Dust filtration is mainly through the airflow sorting, this process to be carried out twice. According to the different density of the material to be effectively layered processing, so that you get the positive and negative pieces with copper, aluminum, nickel and other material materials, and finally all the ultra-fine dust for collection. Then it is transported to the pulse dust collector through the negative pressure system for effective collection. The filtered exhaust gas is then transported through the negative pressure system to the exhaust gas treatment equipment for air purification, and after treatment, it reaches the national emission standard for high altitude emission.