Waste lithium battery recycling equipment treatment dismantling process

Release Time：2022-12-29 20:52:12 Source：Lithium Battery Recycling Machine Share：

       Lithium battery recycling equipment can handle all kinds of waste lithium batteries and positive and negative pieces, lithium battery recycling equipment crushing and separating the operating procedures and precautions for the poles.

      1, shredder 4 grease holes left and right 2, 1 week refill plus ordinary oil, shredder reducer after a year to replace the gear oil add to ⅓ that can be.
      2, conveyor regularly check the conveyor belt, bearing position plus ordinary oil
      3, No. 1 crusher work 50 hours to make up an oil (high temperature resistance), the hydraulic pump can only be used when the blade is replaced.
      4、Tumbler screen replace gear oil once after one year, pay attention to screen inspection, bearing add ordinary oil once after half a month.
      5, No. 1 mill, water function heat dissipation bearing bit oil (high temperature resistant) pay attention to the addition of water.
      6, linear sieve, regular inspection sieve, front end removed when replaced.
      7, No. 2 mill and No. 1 mill maintenance synchronization the same.
      8, spiral conveying pipe regular inspection, found abnormal sound, vibration when checking the bearings.
      9, cycloidal needle reducer regular inspection, add gear oil, generally once a year.
      10、Fan regular inspection, whether the fan vibrates, if there is proof that there is debris in the wind blades, clean up in time.
 

 
      Front-end loading precautions.

      (1) Remember that the iron piece on the machine, found that other metal products promptly remove.
      (2) thick material must be shaken loose.
      (3) In addition to the pole piece of debris removal.

Want to know more about the knowledge of lithium battery recycling machine, welcome to pay attention to this site, reproduced please specify the source: https://www.lithiumbatterybroken.com/industry/271.htmlThank you!