Waste lithium battery recycling equipment and complete processquipment and compl

Release Time：2022-11-21 Source：Lithium battery recycling equipment Share：

         Waste lithium battery recycling equipment and the complete process will usually include: waste lithium batteries (power cells, ternary batteries) of oxygen-poor crushing, waste lithium batteries (power cells, ternary batteries) after the crushing of sorting, sorting out other recycled materials such as metals, and finally processing waste lithium batteries in a series of tail gas treatment emissions process. Specific waste lithium battery recycling system and the complete process is as follows

        Enter the oxygen-poor crushing, crushing through the isolation of oxygen closed air discharge, into the oxygen-free high temperature rapid volatilization, after volatilization of the material into the sorting system, the plastic film class, magnetic material iron class, the battery cell in the copper aluminum plastic shell sorting out. The remaining positive and negative pieces enter the high speed friction system for frictional de-powdering, and the de-powdered materials go through airflow sorting, screening and dust collection, separating the positive and negative powder, copper and aluminum metal particles, and plastic, and then the charged positive and negative powder is sent into the anaerobic cracking system for anaerobic cracking, and the combustible gas produced by the cracking and the exhaust gas produced by the sorting are combined, and the heat produced by the combustion provides a heat source for the cracking furnace, and the decomposition of the front-end exhaust gas as supplemental oxygen and organic gas, and the exhaust gas after incineration is treated with simple exhaust gas, cooling, spraying, filtering, aerosol separation, zeolite honeycomb or activated carbon catalyst to meet the standard discharge.
       
 
        There is not only one treatment method for waste lithium battery, our company has different process solutions for different types of waste batteries, and the complete process of waste lithium battery with electricity is as follows

        In order to prevent the charged lithium battery from entering the system and reacting with some charged substances in the air to produce an explosion, so first vacuum injection of protective gas. Then there is a series of treatment by oxygen-free thermal cracking furnace. Separate out the resources can be used in the use of materials such as, copper, aluminum, stainless steel, plastic shells, etc..
 

        This charged waste lithium battery recycling processing equipment process advantages.


        1 process is relatively simple, equipment operation stability is stronger.

        2 greater utilization of resources.

        3 high recovery rate of pole powder and low production cost.

        4 Higher purity of positive and negative electrode powder and aluminum and copper.

        There is also a charged waste lithium battery processing equipment

        This charged lithium battery crushing and cracking process and the last just started the oxygen-free feeding and filling protective gas is the same, but can not be sorted out plastic plastic shell.
 

        This charged waste lithium battery recycling processing equipment process advantages.


        1, direct oxygen-free cracking after crushing, improve the recovery rate and purity of pole powder and aluminum copper.

        2、Simple process, stable operation and low production cost.

        3, after the cracking can be gas reuse, plastic film plastic shell plastic type no longer recycling.

        These three waste lithium battery recycling process will not produce dioxins (because it is carried out in oxygen-free conditions), the combustion exhaust gas is also treated (cooling, dust collection, spraying, aerosol separation, adsorption and filtration, chimney emissions, etc.) to meet the standards for external emissions, environmental protection, science, health!