Used and waste lithium battery recycling machine using physical sorting method

Release Time：2023-06-23 13:53:00 Source：Lithium Battery Recycling Machine Share：

       With the rapid popularity of new energy vehicles, the production of lithium batteries is also rising, and after time, the amount of lithium batteries in power vehicles will be scrapped in large quantities, especially by 2027, the amount of waste lithium batteries will usher in an unprecedented peak. Used lithium batteries have a certain degree of toxicity in the electrolyte, and if they are discarded at will, they will cause harm to the environment. Therefore, the recycling of lithium batteries is of great significance to the environment and metal resources, and the used lithium battery recycling machine solution is of great importance. Used lithium battery recycling machine using dry physical disassembly sorting method.

       Lithium battery recycling machine process flow:

       Ladder utilization: the lithium battery module is tested, and the lithium battery module which is qualified after testing can be reassembled into a battery pack by ladder utilization. For unqualified batteries after testing will be disassembled by module and then recycled.
       Module disassembly: the lithium battery module will be disassembled and dismantled into a single lithium battery.
       Discharge equipment: the used lithium battery will be discharged first.

       Waste lithium battery recycling and dismantling production line includes: feed conveyor, crusher, fine crusher, magnetic separator, air flow separator, collector, copper and aluminium separator and other equipment combination, so that the waste lithium battery will be dismantled and separated from: black powder, copper, aluminium, plastic diaphragm, iron shell, nickel strip, etc.. The crusher first crushes the used lithium batteries to obtain the crushed material and then the black powder and other mixtures are processed by airflow sorting. The diaphragm wind separator then extracts and collects the plastic diaphragms contained therein, followed by the magnetic separator which collects the iron shells from the mixture, thus obtaining the used lithium battery shells. The mill then grinds the mixture continuously and sieves it to obtain the black powder and copper-aluminium mixture. Finally, the copper and aluminium are separated by means of specific gravity in the copper and aluminium separator, which results in copper and aluminium chips.
 

 
       The lithium battery recycling machine goes through several crushing and screening processes to efficiently separate the valuable metals from the lithium batteries. The recycling value of used lithium batteries is achieved.

Want to know more about the knowledge of lithium battery recycling machine, welcome to pay attention to this site, reproduced please specify the source: https://www.lithiumbatterybroken.com/company/341.htmlThank you!