Lithium battery crushing and separating equipment production line

Release Time：2023-01-03 19:54:01 Source：Lithium Battery Recycling Machine Share：

         Lithium battery crushing and separation equipment is a pollution-free lithium battery decomposition and treatment system with low environmental pollution, high energy utilization and high recovery ratio. It includes shredder, crusher, airflow sorter, magnetic separation conveyor, shredder, analyzer, shaking sieve, grinder, and rotary vibrating sieve in sequence. The process flow of lithium battery crushing and separation equipment is as follows.

         1. Waste batteries are first shredded by the shredder, and the shredded materials enter the crusher, which further crushes the materials to a particle size of less than 3cm.

         2. The waste gas generated by the shredder and crusher work into the pulse dust collector for dust removal, then into the filter box to filter the fumes in the gas, into the UV photolysis purifier, and then discharged into the air by the induced draft fan.

         3. The crushed materials from the crusher are sorted through the airflow sorter, the diaphragm paper follows the airflow into the cyclone collector through the attraction of the induced draft fan, then the airflow enters into the pulse dust collector for dust removal, then the smoke is removed by the filter box, and the organic gas is removed by the UV photolysis purifier and discharged into the air.

         4. After the airflow sorter sorts the diaphragm paper at the other mixture into the shredder for deep crushing, crushing particle size of 20 mesh, crushed materials into the analysis machine.

         5. The analysis machine will produce the same exhaust gas when working, and the exhaust gas will be purified by collector Ⅱ, pulse dust collector Ⅱ, high pressure induced draft fan Ⅱ, filter box Ⅱ, UV photolysis purifier Ⅱ, left and then attracted by induced draft fan Ⅲ and discharged into the air.

         6. The gas generated during the work of the swing screen is dusted by the collector Ⅲ, pulse dust collector Ⅲ and then enters the filter box Ⅱ to remove the soot in the exhaust gas.

         7. UV photolysis purifier Ⅱ removes organic gas and discharges into the air by induced fan Ⅲ. Compared with the traditional activated carbon adsorption plus water spray treatment, the combination of filter box and UV photolysis purifier can significantly improve the purification of flue gas and organic gas, meanwhile, the utilization rate of the equipment is improved by parallel connection, which effectively improves the utilization rate of the equipment and thus reduces the cost.

 
         The complete set of lithium battery crushing and Recycling equipment includes crushing system, conveying system, sorting system, dust removal system, etc. Xingmao lithium battery crushing and separation adopts the physical and mechanical crushing method to process the waste lithium battery, which can effectively purify the gas produced by the physical and mechanical crushing of lithium battery, and at the same time, it adopts the way of series connection and parallel connection to improve the utilization rate of the equipment, which is not only environmental protection but also reduces the cost. Xingmao Environmental Protection specializes in the production of electronic waste treatment equipment to provide waste wire treatment equipment, waste lithium battery treatment equipment, waste point chaos treatment equipment, waste capacitor treatment equipment, waste radiator tank treatment equipment and other solid waste treatment equipment, to understand the equipment process and parameters can be consulted Xingmao Environmental Protection.

Want to know more about the knowledge of lithium battery recycling machine, welcome to pay attention to this site, reproduced please specify the source: https://www.lithiumbatterybroken.com/company/285.htmlThank you!