Lithium battery recycling equipment in the process of metal and plastic separati
Release Time：2022-11-28 Source：Lithium battery recycling equipment Share：
Waste lithium battery recycling equipment to provide you with several metal and plastic separation method in the 21st century, China has entered the peak period of waste electronic appliances waste, how to effectively solve these waste electronic waste, has become an important issue. Resource recycling, the separation of waste electronics and other important issues can be solved, the production of waste lithium battery recycling equipment can be a good solution to the above problem, take this opportunity to introduce you to the current electronic waste in the process of waste lithium battery recycling equipment several separation methods of metal and plastic.
1, metal trap will be crushed waste transported through the pipeline, the use of metal trap in the transmission process will be 0.75 --- 1.2MM diameter metal debris separation out.
2、Electrostatic separator will crush the mixed material and put it into the electrostatic separator, using the different charged characteristics of metal and plastic, copper, aluminum and other metals can be separated. This method is applicable to the treatment of metal-filled composite materials, cable materials and metal-plated plastics.
Technical characteristics and technical indicators of the waste lithium battery recycling equipment production line waste lithium battery recycling equipment takes a dry crushing, crushing, crushing the waste circuit boards into a powder mixture of metal and resin fibers, and then through the wind and electrostatic separation equipment to separate the crushed metal from the resin and non-metallic materials. Mechanical production of large-scale supporting waste lithium battery recycling equipment production line can be a good solution to the treatment of large-scale waste electronic waste, waste lithium battery recycling equipment production line technical characteristics and technical indicators are as follows.
1, the use of mechanical crushing, high-voltage electrostatic separation of new technology. After dismantling, crushing and dissociation, the separation of metallic and non-metallic substances is carried out with high purity.
2, the organic combination of a variety of special crushing and dissociation equipment for waste circuit boards to achieve greater results in the production process, and to achieve a high rate of metal separation.
3, waste lithium battery recycling equipment to deal with each ton of waste circuit board unit energy consumption is only about 3 / 5 of similar domestic products; single set of equipment per hour processing capacity of 1 ton.